TYPE: MEX-X1 (MKP63)
抗電磁干擾電容器 (X1等級)
EMI Suppression Capacitor (X1 Class)
工作溫度-40 ~ +100°C
額定電壓300VAC
電容量範圍0.001 ~ 4.7 μF
特點 / Features
1
類別X1等級
Class "X1" - VDE: DIN EN 60384-14(2005)/IEC 60384-14(2005) AND IEC DRAFT 40 (SEC)677 UL 1414 (250V AC), CAN/CSA-C22.2 Number 1-94(250VAC)
2
適用于旁路、天線耦合、電源跨接繞路和火花消除電路，也適用于EMI濾波器和開關電源、無線設備、馬達與電視應用
Ideal for using in Line-By-Pass, Antenna Coupling, Across-The-Line and Spark killer circuits and available for EMI filter and switching power supply and radio-and monitor, television application.
3
防燃塑料殼與環氧樹脂 (符合UL 94V-0)
Flame retardant plastic cases and epoxy resin. (compliance with UL 94V-0)
4
自癒性特質
Self-healing properties.
5
安全認證: VDE, UL/CUL, ENEC, CQC
Approved By: VDE, UL/CUL, ENEC, CQC
技術參數 / Specifications
工作溫度 OPERATING TEMPERATURE | -40 ~ +100°C |
額定電壓 RATED VOLTAGE | 300VAC |
電容量範圍 CAPACITANCE RANGE | 0.001 ~ 4.7 μF |
耐電壓 DIELECTRIC STRENGTH | Applied 1290VDC for 1 minute |
電容量誤差 CAPACITANCE TOLERANCE | ±5% (J) ±10% (K) ±20% (M) |
絕緣電阻 INSULATION RESISTANCE | C ≤ 0.33μF ≥ 30,000MΩ C > 0.33μF ≥ 10,000MΩ·μF |
損耗角 DISSIPATION FACTOR | 0.1% MAX. at 1KHz |
最大脈衝上升時間 MAXIMUM PULSE RISE TIME | 250 VAC: 120 V/microsecond |
規格尺寸表 / Dimensions
(Unit: mm)
共 46 筆規格
| μF | W | H | T | P | dØ |
|---|---|---|---|---|---|
| 0.001 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0012 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0015 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0018 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0022 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0027 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0033 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0039 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0047 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0056 | 13 | 11 | 5 | 10 | 0.6 |
| 0.0068 | 13 | 10 | 5 | 10 | 0.6 |
| 0.0082 | 13 | 11 | 5 | 10 | 0.6 |
| 0.01 | 13 | 11 | 5 | 10 | 0.6 |
| 0.012 | 13 | 11 | 5 | 10 | 0.6 |
| 0.015 | 13 | 11 | 5 | 10 | 0.6 |
| 0.018 | 13 | 12 | 6 | 10 | 0.6 |
| 0.022 | 13 | 12 | 6 | 10 | 0.6 |
| 0.027 | 13 | 12 | 6 | 10 | 0.6 |
| 0.033 | 18 | 11 | 5 | 15 | 0.8 |
| 0.039 | 18 | 11 | 5 | 15 | 0.8 |
| 0.047 | 18 | 11 | 5 | 15 | 0.8 |
| 0.056 | 18 | 12 | 6 | 15 | 0.8 |
| 0.068 | 18 | 12 | 6 | 15 | 0.8 |
| 0.082 | 18 | 12 | 6 | 15 | 0.8 |
| 0.1 | 18 | 13.5 | 6 | 15 | 0.8 |
| 0.12 | 18 | 14.5 | 8.5 | 15 | 0.8 |
| 0.15 | 26.5 | 15 | 6 | 22.5 | 0.8 |
| 0.18 | 26.5 | 16.5 | 7 | 22.5 | 0.8 |
| 0.22 | 18 | 16 | 10 | 15 | 0.8 |
| 0.22 | 26.5 | 16.5 | 7 | 22.5 | 0.8 |
| 0.27 | 26.5 | 17 | 8.5 | 22.5 | 0.8 |
| 0.33 | 26.5 | 17 | 8.5 | 22.5 | 0.8 |
| 0.39 | 26.5 | 17 | 8.5 | 22.5 | 0.8 |
| 0.47 | 26.5 | 19 | 10 | 22.5 | 0.8 |
| 0.56 | 26.5 | 19 | 10 | 22.5 | 0.8 |
| 0.68 | 32 | 20 | 11 | 27.5 | 0.8 |
| 0.82 | 32 | 22 | 13 | 27.5 | 0.8 |
| 1 | 32 | 20 | 11 | 27.5 | 0.8 |
| 1.2 | 32 | 25 | 13 | 27.5 | 0.8 |
| 1.5 | 32 | 25 | 14 | 27.5 | 0.8 |
| 1.8 | 37 | 25 | 13 | 31.5 | 0.8 |
| 2.2 | 37 | 25 | 13 | 31.5 | 0.8 |
| 2.7 | 37 | 29 | 19 | 31.5 | 0.8 |
| 3.3 | 39 | 32 | 22 | 31.5 | 0.8 |
| 3.9 | 50 | 30 | 20 | 45 | 0.8 |
| 4.7 | 51 | 32 | 20 | 45 | 0.8 |
μF0.001
W13
H11
T5
P10
dØ0.6
μF0.0012
W13
H11
T5
P10
dØ0.6
μF0.0015
W13
H11
T5
P10
dØ0.6
μF0.0018
W13
H11
T5
P10
dØ0.6
μF0.0022
W13
H11
T5
P10
dØ0.6
μF0.0027
W13
H11
T5
P10
dØ0.6
μF0.0033
W13
H11
T5
P10
dØ0.6
μF0.0039
W13
H11
T5
P10
dØ0.6
μF0.0047
W13
H11
T5
P10
dØ0.6
μF0.0056
W13
H11
T5
P10
dØ0.6
μF0.0068
W13
H10
T5
P10
dØ0.6
μF0.0082
W13
H11
T5
P10
dØ0.6
μF0.01
W13
H11
T5
P10
dØ0.6
μF0.012
W13
H11
T5
P10
dØ0.6
μF0.015
W13
H11
T5
P10
dØ0.6
μF0.018
W13
H12
T6
P10
dØ0.6
μF0.022
W13
H12
T6
P10
dØ0.6
μF0.027
W13
H12
T6
P10
dØ0.6
μF0.033
W18
H11
T5
P15
dØ0.8
μF0.039
W18
H11
T5
P15
dØ0.8
μF0.047
W18
H11
T5
P15
dØ0.8
μF0.056
W18
H12
T6
P15
dØ0.8
μF0.068
W18
H12
T6
P15
dØ0.8
μF0.082
W18
H12
T6
P15
dØ0.8
μF0.1
W18
H13.5
T6
P15
dØ0.8
μF0.12
W18
H14.5
T8.5
P15
dØ0.8
μF0.15
W26.5
H15
T6
P22.5
dØ0.8
μF0.18
W26.5
H16.5
T7
P22.5
dØ0.8
μF0.22
W18
H16
T10
P15
dØ0.8
μF0.22
W26.5
H16.5
T7
P22.5
dØ0.8
μF0.27
W26.5
H17
T8.5
P22.5
dØ0.8
μF0.33
W26.5
H17
T8.5
P22.5
dØ0.8
μF0.39
W26.5
H17
T8.5
P22.5
dØ0.8
μF0.47
W26.5
H19
T10
P22.5
dØ0.8
μF0.56
W26.5
H19
T10
P22.5
dØ0.8
μF0.68
W32
H20
T11
P27.5
dØ0.8
μF0.82
W32
H22
T13
P27.5
dØ0.8
μF1
W32
H20
T11
P27.5
dØ0.8
μF1.2
W32
H25
T13
P27.5
dØ0.8
μF1.5
W32
H25
T14
P27.5
dØ0.8
μF1.8
W37
H25
T13
P31.5
dØ0.8
μF2.2
W37
H25
T13
P31.5
dØ0.8
μF2.7
W37
H29
T19
P31.5
dØ0.8
μF3.3
W39
H32
T22
P31.5
dØ0.8
μF3.9
W50
H30
T20
P45
dØ0.8
μF4.7
W51
H32
T20
P45
dØ0.8